Riello INSIEME EVOe 25 B/70 LN, Installation And Maintenance Manual

Page: 31 / 64

31
INSTALLATION
2.17 List of parameters
9
The programming lines can be hidden, according to the access level (User, Installer) and to
the thermal unit configuration.
9
The parameters of Installer level must be changed only by the Technical Assistance Service
R
.
Access level:
U: End user
I: Installer
Key:
DHW Domestic hot water
HT High temperature direct circuit
BT Low temperature mixed circuit
DCW Domestic cold water
OT OpenTherm
SA Ambient probe
SE Outdoor sensor
TA Room thermostat
Menu
Par.
No.
Description Range
Default setting
INSIEME EVOe 25
B/70 LN
UM Access
Main menu
0000 013
Quick adjustment of direct Zone/Zone 1 heating set-
point in 0 and 3 heating modes.
By connecting the zone control accessory, this pa-
rameter can be used to quickly change direct Zone/
Zone 1 setpoint. This parameter simultaneously mod-
ifies the value of Par. 2103.
See Par. 2103 See Par. 2103 °C U
0000 023
Quick adjustment of Zone 2 heating setpoint in 0 and
3 heating modes.
By connecting the zone control accessory, this
parameter can be used to quickly change Zone 2
setpoint. This parameter simultaneously modifies the
value of Par. 2203.
See Par. 2203 See Par. 2203 °C U
0000 033
Quick adjustment of Zone 3 heating setpoint in 0 and
3 heating modes.
By connecting the zone control accessory, this
parameter can be used to quickly change Zone 3
setpoint. This parameter simultaneously modifies the
value of Par. 2303.
See Par. 2303 See Par. 2303 °C U
0000 047 Quick adjustment of DHW setpoint with heater See Par. 2047 °C U
0000 048
Quick adjustment of DHW setpoint with instant pro-
duction
See Par. 2048 °C U
0000 200
Test mode
0 = Function disabled
1= Function active
0…1 0 I
0000 201
Stops the venting function
0 = No action
1 = Stop venting
0…1 0 U
0000 901
Unit of measurement for temperature
0 = °C
1 = °F
0...1 0 U
0000 902
Pressure unit of measurement
0 = BAR
1 = PSI
0...1 0 U
Info menu
1000 1101 Direct Zone/Zone 1 delivery temperature °C U
1000 1102 Direct Zone/Zone 1 ambient temperature °C U
1000 1201 Zone 2 delivery temperature °C U
1000 1202 Zone 2 ambient temperature °C U
1000 1301 Zone 3 delivery temperature °C U
1000 1302 Zone 3 ambient temperature °C U
1000 1001 CH flow temperature °C U
1000 1002 Domestic hot water temperature °C U
1000 1003 Domestic cold water temperature °C U
1000 1004 Outdoor temperature °C U
1000 1007 Return temperature °C U
1000 1033 System pressure bar U
1000 1032 Error code U
1000 1112 Zone 1 heating setpoint °C U
1000 1113 Zone 2 heating setpoint °C U
1000 1114 Zone 3 heating setpoint °C U
1000 1056 Total hours of operation in heating mode h x 10 U