80
IT
A
LIA
NO
FRA
NÇAIS
ES
PAÑOL
POLS
K
I
ROMÂNĂ
ENGLIS
H
2.5 Three-phase installation
Preparation
Before installing the device
Check that the thermostat is compati-
ble with the boiler (see boiler installer
manual).
The wireless
Hi, Comfort T100
ther-
mostat can be installed anywhere,
however the most suitable place
should be chosen taking into ac-
count the following:
− Avoid draughts (A).
− Do not install above sources of
heat (B).
− Avoid direct sunlight (C).
− Position at the appropriate
height (D).
SET
PROG
RESET
ESC
MODE
1,5m
SET
PROG
RESET
ESC
MODE
SET
PROG
RESET
ESC
MODE
SET
PROG
RESET
ESC
MODE
A
B
C
D
Wireless installation does not re-
quire any wiring, making the pro-
cess very simple.
The
Hi, Comfort T100
thermostat can
also be installed with wiring, to replace
any existing thermostat, provided com-
patibility is checked in advance.
Before installing the boiler control unit
(WiFi Box), disconnect the boiler from
the power supply.
Installation
The following tools are required:
− Phillips screwdriver
− Small slotted screwdriver
− Pliers and wire strippers
Installing the Hi, Comfort T100
Remove the
Hi, Comfort T100
from
its base;
Fix the
Hi, Comfort T100
base to the
wall or electrical box using the screws
provided.
Using screws other than those PROVID-
ED may compromise the correct closure
of the plastic. Make sure that the screw
head is correctly inserted in the hole.
