118
IT
A
LIA
NO
FRA
NÇAIS
ES
PAÑOL
POLS
K
I
ROMÂNĂ
ENGLIS
H
ESC
MODE
EXAMPLE OF LINKED HI, COMFORT T100
SET
PROG
RESET
ESC
MODE
2
1
3
4
1
Radio frequency channel
2
Receiver (WiFi Box) number
3
Radio frequency address
4
number of the thermostat as-
signed by the WiFi Box (in the event
of several linked thermostats) –
identifying the zone.
EXAMPLE OF LINKED HI, COMFORT T100
SET
PROG
RESET
ESC
MODE
5
5
number
of
the
transmitter
(Hi, Comfort T100)
To complete the link, press the SET/PRO-
GRAM button or wait for Hi, Comfort T100
to return to the HOME screen.
9
This may take up to 2 minutes,
after which the
Hi, Comfort T100
automatically returns to the HOME
screen.
Should the link not be successful, please
contact the Authorised Service Centre.
NOTE
When replacing the WiFi Box it is neces-
sary to repeat the linking again between
the WiFi Box and Hi, Comfort T100.
Linking the boiler RF receiver to the
WiFi Box
If installing a boiler RF receiver, please
follow the procedure below.
Press the prismatic dome clear LED but-
ton (A) on the
WiFi Box
and hold for 5
seconds until the green and red LEDs
slow flash at the same time (1 sec).
Press and hold again for 5 seconds un-
til the green and red LEDs momentarily
switch off and then flash slowly (every
2 seconds).
B
WPS/Smar
tlink
Outputs Boiler
A
WiFi Box
Boiler RF
receiver
Press the prismatic dome clear LED but-
ton (B) on the boiler RF receiver and
hold for 5 seconds.
The green and red LEDs of the WiFi Box
flash quickly (0.5 sec) and at the same
time to indicate the successful connec-
tion.
Press the button on the WiFi Box again
