Riello 20127134, Installer, Technical Assistan Ce Service And User Manual

Page: 2 / 16

2
GENERAL INFORMATION
This manual, Code 20134553 - Rev. 1 (10/2017)
comprises 16 pages.
GENERAL INFORMATION
RANGE
MODEL CODE
RPS 25/2 EVO 20127134
RPS 25/2 EVO (2 pcs. pack.) 20127135
RPS 25/2 EVO (5 pcs. pack.) 20127136
ACCESSORIES
For a complete list of accessories and details of their compatibil-
ity, refer to the Catalogue.
Dear heating engineer,
We would like to congratulate you on having recommended a
R Solar collector unit: a modern product that's capable of
ensuring a high degree of reliability, efficiency, quality and safe-
ty.
This booklet provides the information necessary for a correct
and simple installation of the system, whatever your expertise
and technical competence.
Thank you again, and keep up the good work,
Riello S.p.A.
CONTENTS
The following symbols are used in this manual:
9
CAUTION! = Identifies actions that require caution and
adequate preparation.
0
STOP! = Identifies actions that you MUST NOT do.
CONFORMITY
Solar collectors comply with EN 12975-1, ISO 9806 and Solar Key-
mark certification.
1 GENERAL SAFETY INFORMATION
9
Check that the product is complete, undamaged and as or-
dered as soon as you receive it. Report any discrepancies or
damage to the
R
dealer who sold it.
9
This product must be installed by a legally qualified heat-
ing engineer. On completion of the installation, the install-
er must issue the owner with a declaration of conformity
confirming that the installation has been completed to the
highest standards in compliance with the instructions pro-
vided by
R
in this instruction manual, and that it con-
forms to all applicable laws and standards.
9
This product must only be used for the purpose for which it
is designed and made, as specified by
R
.
R
declines
all responsibility, contractual or other, for damage to prop-
erty or injury to persons or animals caused by improper in-
stallation, adjustment, maintenance or use.
9
All servicing and repairs must be performed by a qualified
heating engineer.
9
Solar collectors must be installed with the correct mounting
kit (which includes all necessary rails and brackets) as listed
in the Catalogue.
9
A protective film is applied to the glass of the solar collector
to protect the absorber against solar irradiation and prevent
the solar collector from becoming too hot if it is not going
to be put into service immediately. Fill the system, but do
not remove the film until you are ready to put the system
into service. Take care when removing the film as it may be
electrostatically charged. Do not leave the protective film in
place for longer than 12 months. Once removed, the pro-
tective film cannot be re-used. Dispose of the protective
film in compliance with legislation governing the disposal
of PVC.
This manual, Code
- Rev.
comprises
pages. ENGLISH General information
GENERAL INFORMATION
1 General Safety Information . . . . . . . . . . . . . . . . . . . . . . 2
2 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 Description of the appliance . . . . . . . . . . . . . . . . . . . . . 4
4 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5 System layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6 Technical specifications. . . . . . . . . . . . . . . . . . . . . . . . . 5
INSTALLATION
7 Unpacking the product . . . . . . . . . . . . . . . . . . . . . . . . . 7
8 Handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
9 Installation area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
10 Installation on flat roofs with ballast. . . . . . . . . . . . . . . 9
11 Water connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
12 Source water system . . . . . . . . . . . . . . . . . . . . . . . . . . .11
13 Filling and emptying. . . . . . . . . . . . . . . . . . . . . . . . . . 12
14 Device cleaning and maintenance . . . . . . . . . . . . . . . 12
15 Recycling and disposal . . . . . . . . . . . . . . . . . . . . . . . . 12
END USER
16 External maintenance. . . . . . . . . . . . . . . . . . . . . . . . . 13