Riello 20127134, Installer, Technical Assistan Ce Service And User Manual

Page: 7 / 16

7
INSTALLATION
INSTALLATION
7 UNPACKING THE PRODUCT
Solar collectors are supplied in packages containing 1, 2 or 5
panels
Pallet contents:
− collector
− document envelopes containing instruction manual, bar
code labels and data label.
2
2
1
9
Be careful not to lose the two flat gaskets (1) in the corner (2)
of each collector.
9
The instruction manual is an integral part of the solar con-
nector. Once located, read it thoroughly and keep it safe.
9
STORE IN A DRY PLACE AND DO NOT EXPOSE TO DIRECT SUNLIGHT
UNTIL THE TIME OF INSTALLATION! The packaging is not de-
signed to protect the product against rain or humidity. It can
also degrade if exposed to direct sunlight. Failure to comply
with these precautions could lead to irreparable damage to
the product.
9
A protective film is applied on the collector glass, gener-
al and handling information is written on it. It must be
removed after the installation of the solar collector, only
when the operation of the system is required.
Installation
8 HANDLING
− Separate the solar collector from the wooden pallet by
removing the film wrapping
− Apply the data label (provided in the document enve-
lope) to the back of the solar collector
Once you have removed the outer packaging, proceed as follows
to unpack and handle the solar collector:
− Tilt the solar collector slightly and grip it at the four points
shown (A) to lift it.
− Use a hoist or other suitable lifting equipment to hoist
the solar collector on to the roof.
Data label
A
A
A
A
Codice . . . . . . . .
Modello . . . . . . .
Matricola . . . . . .
Codice . . . . . . . . . . . . . . . . . . . . .
Tipo . . . . . . . . . . . . . . . . . . . . . . .
Dimensioni. . . . . . . . . . . . . . . . . .
Superficie lorda . . . . . . . . . . . . . .
Superficie di apertura . . . . . . . . .
Superficie assorbitore . . . . . . . . .
Peso a vuoto . . . . . . . . . . . . . . . .
Massima pressione di esercizio .
Contenuto liquido . . . . . . . . . . . .
Massima concentrazione glicole .
Liquido termovettore . . . . . . . . . .
COLLETTORE SOLARE (neutro)
FABBRICATO IN ITALIA da Riello S.p.A.
Temperatura di stagnazione . . . . °C
TCOLL_NEUTRO2
9
Wear suitable personal protective equipment and use suit-
able safety devices.
0
Do not dispose of packaging material into the environment,
or leave it within the reach of children, since it can become
a potential hazard. Dispose of packaging material in com-
pliance with applicable legislation.
0
Do not lift the solar collector by its water fittings.