Riello 20118250, Installation And Maintenance Manual

Page: 29 / 64

29
INSTALLATION
MENU selection
Access the “menu” mode by pressing the key “ENTER/RESET” The digits of the small display indicate “0000”, which is the first acces-
sible menu.
5
3
4 2
1
In this mode, keys have the following functions:
Nr. Button Function
1 "+" Exits from the menu and cancels a parameter change
2 "-" Exits from the menu and cancels a parameter change
3 "
▲
" Selects the following menu or increases a certain parameter value
4 "
▼
" Selects the previous menu or decreases a certain parameter value
5 "ENTER/RESET" Enters into the selected menu/parameter or confirms the parameter change
2.15 Enter password
To access INSTALLER parameters, it is necessary to enter the pass-
word:
− Press the key “ENTER/RESET” and select “Code” by using
the keys "
▲
" and "
▼
".
− Press the key “ENTER/RESET“ to confirm
− Press the keys "
▲
" and "
▼
" to increase or decrease the
value of the blinking digit
− Once the required value is obtained, press the key “EN-
TER/RESET” to confirm the entered value
After entering the INSTALLER password the relevant menus and
parameters will also be displayed.
The system provides for three types of access:
USER: new password
INSTALLER: password 18
9
After entering the password, the display will show the sym-
bol
which will be displayed until the displaying and/or
parametrisation proceed. After some minutes of inactivity of
the display, it must be entered again.