0MLMHTM16RUENUB page 11 / 85
2.
Preliminary operations
2.1
Removing the packaging and positioning the UPS
On delivery, the packaging must be inspected to ensure that it is whole and that it has not been crushed or
dented. Check in particular that neither of the two impact indicator devices on the packaging is red; if one of
them is red; follow the instructions on the packaging.
The relevant data of the UPS are provided on the shipping document. The marking, weight and dimensions of
the different items making up the packing list are shown.
Check the state of the UPS by means of a visual inspection of both the inside and the outside. Any dents noticed
mean that the UPS has suffered shocks during shipping, which could compromise the normal operation.
2.2
Storage
In the following situations:
-
installation not immediately after delivery;
-
de-installation and storage while awaiting relocation,
Place the device in covered premises that are protected from direct contact with atmospheric agents and dust.
The following environmental values are those allowed in the storage area:
Temperature:
-13°F
to
+167°F (
-25 to + 75 °C)
Relative humidity:
30-95 % max.
For the installation of a battery cabinet, if provided with the uninterruptible power supply, follow the
instructions given in the specific manual.
The list of material provided may vary depending on the order specifications. As a general rule, the packaging
should include the following: the manual, the installation drawing, the warranty and the accessories if requested.
2.3
Handling
The equipment must only be handled by trained personnel. It can be unloaded from the vehicle and put into place
by lifting the box or the wooden deck to which the equipment is secured with a fork-lift truck. A fork-lift truck
should be used for the permanent positioning of the equipment, in accordance with the instructions provided
below.
1
Insert the forks of the fork-lift truck in the lower part of the device, from the front or back, and
ensure that they stick out about 12 inches on the other side.
2
Secure the device to the fork-lift before moving it.
Risk of overturning
In order to avoid the risk of the device overturning, ensure that it is firmly secured to the fork-lift truck by
means of appropriate ropes before moving it.
