E
N
G
LI
S
H
Engine Rieju
Engine
26
2.5 ENGINE REASSEMBLY
1) PLACE
the clutch crankcase (right hand side) on a flat surface. Then, fit the spring and
the gear selection poppet ball in their seats and apply
grease
to prevent them falling out.
2) PREPARE
the transmission assembly (primary/secondary) keeping all components to-
gether (F-36). Put a 0.6 mm shim washer under the 1
st
speed gear and position the fork in
the 3
rd
and 4
th
primary gear (F-36).
LOWER
the assembly thus formed into its seats (F-37).
Raise the 5
th
speed gear on the secondary shaft and insert the fork (F-38).
Fit the other fork (6
th
speed gear) into its seat (F-39).
F-37
F-36
F-39
F-38
G
