E
N
G
LI
S
H
Engine Rieju
Engine
30
14) PROCEED
in reverse order. Refit the clutch assembly and remember to replace the
nut fixing washer with a new one; fit the clutch boss fixing nut (
Cs
5.5 ÷ 6.0 kg*m) and
bend the tab.
15) FIT
the following components on the output shaft, in the order given: clutch rod (
grea-
se
beforehand), ball and disc pusher.
16) FIT
the clutch disc assembly in the order shown in (F-54); the iron discs (1-2-3/F-54)
should be fitted with the notch, highlighted by the arrows, at 120° the one from the other,
starting from the notch facing upwards on the first disc. Fit the last clutch disc, making sure
it is timed with the boss (F-54b).
F-54b
F-54
F-52
F-53
F-55
