22
05/2010
Rieber GmbH & Co KG
Switching on the appliance
•
Plug in the connecting plug.
Standby indicator (2) will light up.
Press the standby button (5).
•
Fan indicator (3) will light up. Fan is running.
•
Display indicates the current temperature.
Keep pressed SET – button (7) and set the target temperature using the + - buttons.
Release the SET - button.
•
The current temperature is displayed again.
•
This setting will remain set even if the system is kept unplugged for a
long period of time.
Press the START - button (6) .
•
Heating / cooling (4) ON indicator will light up.
•
Temperature is increased / reduced until the target temperature is
reached.
Switching the unit off
Press the START - button.
•
Heating / colling is deactivated.
•
Heating / cooling (4) ON indicator will go off.
•
Fan will continue to run until standby mode is activated.
Press the Standby - button (5).
•
Display will go off.
•
Fan indicator (3) will go off. Fan stops.
•
Standby (2) indicator will light up.
•
The appliance is switched off.
7. General information on using the product
7.1 Keep to the basic rules for operating the product
•
Never operate the appliance unsupervised.
•
Comply with hygiene requirements according to HACCP.
•
Keep the product in a clean and hygienically spotless condition.
Risk of burns! Do not touch hot parts. Wear personal safety gear, if necessary
DANGER!
Danger of electric shock. Risk of death.
•
Remove the product from the mains before cleaning.
•
Never direct a jet of water at electrical components such as heater, controller or ventilation grille.
