16
05/2010
Rieber GmbH & Co KG
Program 1: Cook
•
The indicators of chamber temperature, time and steam function buttons
will flash (flashing = may be changed).
Set the chamber temperature, time and steam.
Press the START - button.
•
The “Cook” program starts with the stored settings.
Press STOP – button and keep it pressed for approx. 5 seconds:
•
Back to functions. These can be re-adjusted. The program currently
running will not be interrupted.
Press STOP – button again and keep it pressed for approx. 5 seconds:
•
Back to program selection. The program currently running will be
stopped.
Press STOP – button again and keep it pressed for approx. 5 seconds:
•
Standby mode is activated.
Program 2: core temperature
•
The indicators of core temperature, chamber temperature, time and
steam function buttons will flash (flashing = may be changed).
Set the core temperature, chamber temperature, time and steam.
Press the START - button.
•
The “Cook” program starts with the stored settings.
Press STOP – button and keep it pressed for approx. 5 seconds:
•
Back to functions. These can be re-adjusted. The program currently
running will not be interrupted.
Press STOP – button again and keep it pressed for approx. 5 seconds:
•
Back to program selection. The program currently running will be
stopped.
Press STOP – button again and keep it pressed for approx. 5 seconds:
•
Standby mode is activated.
Program 3: Fan
•
Put in the cooling pellets, otherwise cooling is not possible.
Passive cooling with circulating air + cooling pellets.
•
Air circulation begins when this program is started.
•
The current chamber temperature is shown in the display.
