![RIDGID SeeSnake CS10 Operator'S Manual Download Page 11](http://html.mh-extra.com/html/ridgid/seesnake-cs10/seesnake-cs10_operators-manual_1458371011.webp)
English - 9
TM
When the unit is turned ON and batteries are in the
battery docks, the battery indicator LEDs on the CS10
will reflect the state of each battery as shown in Table 5�
Table 5
Battery Status LED Indicators
LED Behavior
Meaning
Left LED is green
Right LED is OFF
Battery full charge
Left LED is green
Right LED is red
Battery partial charge
Left LED is OFF
Right LED is red
Battery low
Blinking red and
beeps
Replace batteries
immediately�
Shutdown in 1 minute
Solid red and
continuous tone
Dead batteries�
Shutdown in 5 seconds
Slow blink
External power in use�
Beeps when disconnected
Outlet Power
To operate the CS10 using AC power, locate the power
cord on the back of the unit� Unhook the Velcro® strap
and remove the plug from its holder (
See Figure 12).
Plug the power cord into a standard outlet� If using an
extension cord no greater than 25 ft [7�6 m], ensure
the cord has a gauge of at least 18 AWG� If using an
extension cord greater than 25 ft [7�6 m], ensure the
cord has a gauge of at least 16 AWG�
Figure 11 – Power Cord and Power Cord Wrap
NOTE
The provided external power supply is
intended for indoor use only�
Interface Overview
Navigating
Use the arrow keys on the CS10 to navigate through
menus and screens� Use the Select Key to make
selections and to apply changes� Use the Menu Key
to move backwards through menus and screens, and to
cancel out of a menu�
Table 6
CS10 Keys and Functions
Icon
Name
Function
Power Key
Turns the CS10 ON or OFF
Select Key
Used to select menu items�
Arrow Keys
Used to navigate menus and
screens�
Menu Key
Allows access to the Settings,
Display, Language, and Media
Menus�
Photo Key
Takes a photo�
Autolog Key
Starts and stops Autolog video
recording� Autolog videos
are made up of continuous
audio recording and still-
image frames taken at regular
intervals and saved in a
compressed format� When an
Autolog video is recording, the
LED located on the bottom of
the Autolog Key will be red�
Video Key
Starts and stops video
recording� When a video is
recording, the LED located on
the bottom of the Video Key
will be red�
Job Manager
Key
Opens a menu to allow the
manual ejection of the thumb
drive, the manual creation of a
Report, and access to the list
of files on the thumb drive for
viewing�
Microphone
Mute Key
Toggles the microphone ON
or OFF� When ON, the LED on
the Microphone Mute Key will
be gold�
Summary of Contents for SeeSnake CS10
Page 21: ...English 19 TM Notes ...