English – 21
Cleaning
For light cleaning, use a soft, damp cloth to wipe down
the Compact2. If desired, you can use a disinfectant.
NOTICE
Using solvents to clean any part of the
system can affect waterproofing.
To thoroughly clean the Compact2, follow these steps:
1. Prepare:
• Disconnect the system cable from the digital re-
porting monitor and remove the monitor from the
docking system.
• Make sure the slip-ring dial is in the locked
position.
• Push the camera through all three push cable
guides and into the drum so the drum can spin
freely.
2. Stand the Compact2 upright and pour lukewarm
water and a mild detergent into the drum.
NOTICE
High pressure water can damage the
seals that protect the electronics inside
the drum.
3. Spin the drum to loosen the debris.
4. Tip the drum opening down to empty the water.
5. In a large area, pull the push cable through the
guides and completely out of the drum. Do not try to
coil the push cable outside of the drum.
6. Use a hose to clean the empty drum.
7. Fully dry the Compact2. Run a rag over the push
cable while you push it back into the drum.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
