background image

18

19

IMPORTANT SAFETY INSTRUCTIONS

•  Use only extension cords that are rated 

for outdoor use. Extension cords in poor 

condition or too small in wire size can 

pose fire and shock hazards. To reduce 

the risk of these hazards, be sure the 

cord is in good condition and that liquid 

does not contact the connection.  Do not 

use an extension cord with conductors 

smaller than 1,3 mm

2

 (16 AWG).

• This Wet/Dry Vac is double-insulated, 

eliminating the need for a separate 

grounding system. Use only identical 

replacement parts. Read the instructions 

for Servicing Double-Insulated Wet/Dry 

Vacs before servicing.

• Do not put any object into ventilation 

openings. Do not vacuum with any 

ventilation openings blocked; keep free 

of dust, lint, hair or anything that may 

reduce air flow.

•  Keep hair, loose clothing, fingers, and 

all parts of body away from openings 

and moving parts.

• To reduce the risk of falls, use extra 

care when cleaning on stairs.

•  To reduce the risk of back injury or falls, 

do not lift a Vac that is heavy with liquid 

or debris.  Partially empty by scooping 

debris or draining liquid. 

• To reduce the risk of personal injury 

or damage to Vac, use only RIDGID 

recommended accessories.

•  When using as a blower:

  -  Direct air discharge only at work area.

  -  Do not direct air at bystanders.

  -  Keep children away when blowing.

  -  Do not use blower for any job except  

    blowing dirt and debris.

  -  Do not use as a sprayer.
•  To reduce the risk of eye injury, wear 

safety eyewear.  The operation of any 

utility Vac or blower can result in foreign 

objects being blown into the eyes, which 

can result in severe eye damage.

Observe the following warnings that 

appear on the motor housing of your Vac:

WARNING: To reduce the risk of 

electric shock - do not expose to 

rain - store indoors.

DOUBLE INSULATED

GROUNDING NOT REQUIRED.

WHEN SERVICING USE ONLY 

IDENTICAL REPLACEMENT PARTS.

!

 

SAVE THIS MANUAL

CAUTION:  

•  To reduce the risk of hearing damage, 

wear ear protectors when using for 

extended hours or in a noisy area.

•  For dusty operations, wear dust mask.

•  Static shocks are common when the 

relative humidity of the air is low. 

 

Vacuuming fine debris with your Vac can 

deposit static charge on the hose or Vac. 

To reduce the frequency of static shocks 

in your home or when using this Vac, add 

moisture to the air with a humidifier.

!

WARNING: 

•  For your own safety, read and 

understand owner’s manual.

•  Do not run unattended.

•  Do not pick up hot ashes, 

coals, toxic, flammable or other 

hazardous materials.

•  Do not use around explosive 

liquids or vapors.

!

SP7071 HD1200M0.indb   18

8/31/18   11:59 AM

Summary of Contents for HD1200M0

































Reviews: