III. Adjusting FlexLoc for back fit
1. Adjust back height.
a. Loosen clamp screws and slide
FlexLoc up/down on back canes,
and/or
b. Loosen back height set screws
and slide back up/down on slot.
2. Adjust back angle.
a. Loosen back angle screws (4)
and adjust back angle to desired
orientation.
b. Loosening of these screws also
provides for lateral movement of
center clamp along connecting
tube for lateral adjustment of back
support.
5
Back Angle
a
Figure 7a
Figure 8
Figure 7b
b
