Care and Maintenance of your Ride Decaf JAVA Back
Cleaning the Decaf JAVA Back foam insert and cover
1. Remove the foam insert and cover from the Decaf back shell.
2. Open the cover and remove the foam pad, Flexa-just stays (make note of left
and right, and direction of bend), and flexa-just platform with pelvic wedges from
the outer cover. Note: Ride Designs recommends using a permanent marker to
carefully outline the position of the pelvic wedges so that you can reattach them in
the same positions if moved during cleaning.
3. Close the cover. Machine or hand wash the cover in warm water (regular
detergent, no bleach).
4. Hang dry.
5. When re-inserting the Flexa-just stays, return them to their correct pockets,
facing in the correct direction.
6. Insert the foam pad and Flexa-just platform with pelvic wedges. Be sure the
inserts are not folded or wrinkled inside the cover.
7. Close the cover and reattach the foam insert and cover to the back shell.
WARNING: Installing the Flexa-just stays or pelvic wedges in the wrong positions
might result in serious injury to the user.
Cleaning the Decaf JAVA back shell and hardware
Using a damp cloth or mild disinfectant, clean the shell, pelvic wedges, and
mounting hardware as needed.
CAUTION: Do not clean your Decaf Back with isopropyl alcohol or any other
chemical solvents.
10
