3. Adjust seat depth and vertical
rotation.
a. Loosening of pivot screws and
width adjustment set screws allows
for seat depth and vertical rotation
adjustment as shown.
NOTE: Pivot screws must be loosened
sufficiently to separate teeth to allow
movement.
Once adjustments are completed, ensure all fasteners are securely tightened.
Visit www.ridedesigns.com for additional instructions.
IV. Adjusting the Flexa-just Stays
1. The Flexa-just stays are thin
aluminum strips inserted into pockets
on the inside surface of the back cover,
behind the foam pads. NOTE: The
Flexa-just stays can be bent to provide
comfortable support to the gluteal area
below the level of the back shell.
Depending on the unique needs of the
user, you can easily adjust the stays to
provide the correct amount of support.
The stays are easy to bend using hand
pressure—no tools are required
(Figure 10).
2. The stays can be bent while the user is sitting in the wheelchair. Simply insert
your hand between the foam insert and the sitter, grasp the lower portion of the
stays through the cover and foam insert, and bend in the amount and direction
needed to apply comfortable support.
6
Figure 10
Flexa-just stays
Seat Depth
Vertical Rotation
Figure 9
