5.3
Software settings
After scanning is complete, the system is updated with all the functions necessary to
control the climate and irrigation equipment in your greenhouse. (These functions are
collectively referred to as the controls.) A number of software settings have been
preset. To access the software settings, tap the System Time icon ‘
'.
Figure 5-4:
Tap the System Time icon to open the configuration menu.
To access the software settings, navigate this path:
.
Please check the following settings:
Time
Required for time-related settings, such as:
system date/time
,
time
format
and
time zone
.
Location
The system's location is necessary in order to determine the sunrise
and sunset times.
Network address
If a network is required, you need to check your network
settings.
Physical components
Various controls have purple tiles representing the
physical components.
5.3.1
Time
The system time needs to be set correctly in order to ensure that automatic control
actions are performed at the right times. You can find the required settings on the
settings screen '
'.
The time-related settings are:
System date/time
The system date/time is displayed automatically. Check
whether the
System date/time
setting is correct.
Time format
You can choose from a 12-hour format (using AM and PM) or a
24-hour format. Set the
Time format
setting to the desired time format.
Time zone
You need to specify your current time zone and the UTC offset
(compensation) for your location.
NoNa
+
43
Summary of Contents for NoNa+
Page 1: ...SV 2 4 15 05 2020 96000023 Installation and User Manual NoNa...
Page 70: ...Signature Date NoNa 70...
Page 71: ......
Page 72: ......