background image

32DDO04.A 

1 - 2

RICON CORPORATION 

ONE-YEAR LIMITED WARRANTY 

 

 

Ricon Corporation (Ricon)

 warrants to original purchaser of this product that Ricon will repair or replace, at 

its option, any part that fails due to defective material or workmanship as follows:  
•  Repair or replace parts for a period of one year from date of purchase. 

 

If You Need to Return a Product:

 Return this Ricon product to your installing dealer.  Please give as much 

advance notice as possible and allow a reasonable amount of time for repairs. 

 

If You are Traveling:

 All authorized Ricon dealers honor this warranty.  Consult telephone directory or call 

our Product Support department for name of nearest authorized Ricon service technician. 

 

This Warranty does not Cover: 

§ 

Labor or service charges (these may be covered separately by the installing service technicians).

 

§ 

Malfunction or damage to product parts caused by accident, misuse, lack of proper maintenance, neglect, 
improper adjustment, modification, alteration, the mechanical condition of vehicle, road hazards, 
overloading, failure to follow operating instructions, or acts of Nature (i.e., weather, lightning, flood). 

 

Note:

  Ricon recommends that this product be inspected by an authorized Ricon service technician at least 

once every six months, or sooner if necessary.  Any required maintenance or repair should be performed at 
that time. 

           WARNING!

 

THIS PRODUCT HAS BEEN DESIGNED AND MANUFACTURED TO EXACT SPECIFICATIONS.  
MODIFICATION OF THIS PRODUCT IN ANY RESPECT CAN BE DANGEROUS. 

 

This Warranty is Void if:

 

•  The product has been installed or maintained by someone other than an authorized Ricon service techni-

cian. 

•  The product has been modified or altered in any respect from its original design without written authoriza-

tion by Ricon. 

Ricon disclaims liability for any personal injury or property damage that results from operation of a 
Ricon product that has been modified from the original Ricon design.  No person or company is au-
thorized to change the design of this Ricon product without written authorization by Ricon. 
Ricon's obligation under this warranty is exclusively limited to the repair or exchange of parts that 
fail within the applicable warranty period. 
Ricon assumes no responsibility for expenses or damages, including incidental or consequential 
damages.  Some states do not allow the exclusion or limitation of incidental or consequential dam-
ages, so the above limitation or exclusion may not apply. 
Important:  The warranty registration card must be completed and returned to Ricon within 20 days 
after installation of this Ricon product for the warranty to be valid.  The warranty is not transferable. 
The warranty gives specific legal rights, and there may be other rights that vary from state to state.

 

Summary of Contents for RDO2700 Series

























Reviews: