background image

32DDO04.A 

1 - 1

I. 

INTRODUCTION

 

he RICON RDO2700 Series Power Swing Door Operators open and close swing-type van doors.  They are de-
signed to operate in most full size vans, and can provide up to 90

°

 of motion for each door.  The operators have 

adjustable linkage that provides exact positioning of each open door.  Further adjustment is available at the 

heavy, splined connection between the operator and its linkage arm.  The door operators are installed on the vehicle 
floor, adjacent to the door hinges. 

The power door operators work with Ricon wheelchair lifts and 
ramps.  As the lift or ramp is activated to DEPLOY, or extend 
from the vehicle, the power door operators automatically open 
the vehicle doors.  After the lift or ramp has been used and is ac-
tivated to STOW and retract into the vehicle, the door operators 
automatically close the vehicle doors.  The power door operators 
are installed onto two doors but for safety reasons only one door 
is allowed to operate at a time. 

This manual contains installation, maintenance instructions, and 
parts diagrams and lists for the Power Door Operator.  The in-
stallation instructions must be followed exactly, no steps should 
be eliminated nor should the product be modified.  It is important 
to user safety that the installation is thorough and correct.  It is 
equally important that the Ricon sales/service staff be com-
pletely familiar with the Operating Instructions chapter of the 
Operator manual to demonstrate and explain the proper use of 
the product to the user.  Once the operators are installed, it is 
very important that it be properly maintained by following the Ri-
con recommended cleaning, lubrication, and inspection instruc-
tions. 

If there are questions, comments, or suggestions about this manual and it’s information, please contact Ricon Product 
Support at one of the following locations: 

Ricon Corporation 
7900 Nelson Road 
Panorama City, CA 91402 ...........................................................................................................(818) 267-3000 
Outside (818) Area Code.............................................................................................................(800) 322-2884 
World Wide Website.......................................................................................................... www.riconcorp.com 

Ricon U.K. Ltd. 
Littlemoss Business Park, Littlemoss Road 
Droylsden, Manchester 
United Kingdom, M43 7EF ...................................................................................................(+44) 161 301 6000 

Ricon Scandinavia A/S 
Stanseveien 27 
N-0976 Oslo 
Norway...................................................................................................................................... (+47) 22 16 70 90 

A. 

RICON ONE-YEAR LIMITED WARRANTY  

(refer to following page)

 

 

Summary of Contents for RDO2700 Series

























Reviews: