Ricon RDO2700 Series, Service Manual, Page: 12 / 24

32DDO04.A 2 - 3
E. INSTALLATION COMPLETION
1. If power door operators are installed in side door, reinstall stepwell cover.
2. Reinstall all doorstops and latches, where applicable, to the vehicle.
3. Reinstall door plastic moisture barriers.
4. Use door flange washer to cover the interior panel exit holes for the actuator arms. Reinstall interior
panels and reinstall actuator arms to the door operators.
5. Reinstall door trim, carpet, plywood, molding, wall paneling or any other material that has been re-
moved.
6. Refer to the Operating Instructions chapter of this manual and perform several cycles of operation.
F. CUSTOMER ORIENTATION
IMPORTANT
- Customer Orientation -
Ricon Sales/Service Personnel must review the Warranty and Service/Owner Manual with the cus-
tomer to be certain he/she understands the safe operation of the equipment. Instruct the customer
to always follow the operating instructions without exception.
Refer to Figure 2-5 and ensure that all decals are properly located and affixed as shown on the following page.