Ricoh Y406, Field Service Manual

Page: 22 / 104

3.Replacement and Adjustment
16
3.
Remove the rear cover [A].
4.
Remove the SSD from the old controller box. ( Removing the SSD (Controller Type 2/ OP-10/ OP-
5) )
5.
Install the SSD on the new controller box.
6.
Remove the COA label [A] from the old controller box, and then put the COA label on the new
controller box.
7.
Put the transparent seal included in this replacement unit on the COA label to prevent it from
peeling off.
SSD
Notes on Replacing the SSD

If the SSD is replaced, the system language will be automatically changed to Japanese. See
"Reconfiguring the Language Settings" ( Reconfiguring the Language Settings ).

When the SSD is replaced, all settings are initialized. Perform reconfiguration if necessary. For
the following settings, ask the customer to reconfigure.

Administrator password