SERVICE PROGRAM MODE
26 July 2002
5-58
7
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
Access code clear
810
1
Access code clear
Clears the key operator password.
SP7
-
810
clears the key operator password. After
clearing this code, stored data can be accessed without
using it.
To register a new key operator password, use SP5-409-
1.
Original Counter Clear
811
1
Original Counter Clear
Clears the original counter.
Tray Counter Clear
1
Tray 1
Clears the tray counters (SP7-204).
[0 ~ 1 /
0
/ 0 /step]
2 Tray
2
3 Tray
3
4 Tray
4
5 Bypass
Tray
816
6 Tray
Duplex
Memory Clear
822
1
Copy Cunter:
Magnification Clear
Clears the copy counter (classified by magnification)
Electrical Counter Reset
825
1
Electrical Counter
Reset
Sets the total counter to “0”.
[0 ~ 0 /
0
/ 0 /step]
MF Error Counter
1 Error
Total
826
2 Error
Staple
Displays the MF error counters.
MF Error Counter Clear
827
1
MF Error Counter
Clear
Clears the MF error counter.
Diagnostic result
832*
1 Diagnostic
Result
Displays the result of the diagnostics. Refer to section
4.2 for the error codes.
[0 ~ 0 /
0
/ 0 /step]
Coverage
1 Last:
M
2 Last:
C
3 Last:
Y
4 Last:
Bk
5 Average:
M
6 Average:
C
7 Average:
Y
833
8 Average:
Bk
Displays coverage ratios.
[0.00 ~ 100.0 /
0.00
/ 0.01 %step]
This SP mode displays the “coverage ratio” of the
output, i.e. the ratio of the total pixel area of the
image data to the total printable area on the paper.
Do not use this counter for billing purposes. This is
because this value is not directly proportional to the
amount of toner consumed, although of course
it is one factor that affects this amount. The other major
factors involved include: the type, total image
area and image density of the original, toner
concentration and developer potential.
Last: This is the coverage for the previous sheet.
Average: This is the average coverage for each sheet.
