26 July 2002
COPY ADJUSTMENT
3-53
R
e
placement
Ad
ju
s
tm
e
n
t
3.12 COPY ADJUSTMENT
3.12.1 PRINTING
NOTE:
1) Make sure the paper is installed correctly in each paper tray before you
start these adjustments.
2) Use the Trimming Area Pattern (SP5-955-1, No.11) to print the test
pattern for the following procedures.
3) Set SP 5-955-1 to 0 again after completing these printing adjustments.
Registration - Leading Edge/Side-to-Side
1. Check the leading edge registration for each paper feed station, and adjust
them using SP1-001.
2. Check the side-to-side registration for each paper feed station, and adjust them
using SP1-002.
Tray SP
mode
Specification
Any paper tray
SP1-001-1
By-pass feed
SP1-001-9
Duplex SP1-001-12
3
±
2 mm
1st paper tray
SP1-002-2
2nd paper tray
SP1-002-3
3rd paper tray (optional
paper tray 1), or LCT
SP1-002-4
2
±
1.5 mm
4th paper tray (optional
paper tray 2)
SP1-002-5
By-pass feed
SP1-002-1
Duplex, side 2
SP1-002-6
A: Leading Edge Registration
B: Side-to-side Registration
B
A
B051R558.WMF
