Ricoh TC-II Operating Instructions Manual Download Page 56

Page: 56 / 64

Remarks

Maintaining Your Machine

To maintain high print quality, clean
the following parts and units regularly.

❖

Cleaning the machine

Wipe the machine with a soft,
damp cloth. Then wipe it with a
dry cloth to remove the water.

Important

❒

Do not use chemical cleaner or or-
ganic solvent, such as thinner or
benzene. If they get into the ma-
chine or melt plastic parts, a failure
might occur.

❒

Do not clean parts other than those
specified in this manual. Such
parts should be cleaned by your
service representative.

Cleaning the Main Frame

Cleaning the paper feed roller (Paper
feed tray)

Wipe off the paper dust on the pa-
per feed roller with a damp cloth,
then wipe it with a dry cloth.

Note

❒

If you do not clean the paper
feed roller, paper misfeeds tend
to occur.

Summary of Contents for TC-II

































































Search results

Summary of Contents for TC-II

Reviews:

Related manuals for TC-II

Brands by name

Popular brands

Ricoh TC-II, Operating Instructions Manual

Search results

Summary of Contents for TC-II

Reviews:

Related manuals for TC-II

Brands by name

Popular brands