Ricoh TC-II Operating Instructions Manual Download Page 42

Page: 42 / 64

Troubleshooting

When the Add Ink Indicator (

) Lights

The

Add Ink

indicator (

) lights when it is time to supply ink.

CAUTION:

Note

❒

Be sure to supply ink of the same color as the current drum.

❒

Ink is readily removed from skin by waterless hand cleaners followed by
washing with soap and water.

❒

Be careful not to get any ink on your clothing.

❒

Store ink under low temperature and humidity conditions.

❒

Do not store ink where it will be exposed to heat or direct sunlight.

❒

Store on a flat surface.

Open the front door.

Pull out the ink holder.

•

If ink comes into contact with your eyes, rinse immediately in running water.
In the case of any abnormal symptoms, consult a doctor.

•

Keep the ink or ink container out of the reach of children.

•

If ink is ingested, force vomiting by drinking a strong saline solution and con-
sult a doctor immediately.

•

Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you only use the expendable supplies avail-
able at an authorized dealer.

Summary of Contents for TC-II

































































Search results

Summary of Contents for TC-II

Reviews:

Related manuals for TC-II

Brands by name

Popular brands

Ricoh TC-II, Operating Instructions Manual

Search results

Summary of Contents for TC-II

Reviews:

Related manuals for TC-II

Brands by name

Popular brands