Ricoh Soleil-PJ WX4130, Field Service Manual, Page: 80 / 100

Problem Solutions
The remote control does not
respond. • Make sure the ID assigned to the remote control and in
the settings of “Remote Control ID” in “Default Settings”
are the same.
For details, see the Operating Instructions.
• Make sure the batteries in the remote control are not
dead.
• Make sure the batteries are correctly loaded into the
remote control.
For details, see the Operating Instructions.
• Make sure the remote control is inside its effective range.
c
• Make sure there is nothing placed between the remote
control and the projector.
• Make sure the remote control receiver is not exposed to
strong light.
No images from USB devices.
(Y012 only) • Make sure the USB memory device is connected
correctly.
• Make sure the connected USB memory device is
compatible with the projector.
• Make sure there are JPEG or MPEG files saved on the
USB memory device.
• Make sure the compression format, file size, and other
conditions are compatible with the projector.
For details, see the Operating Instructions.
Wired LAN is disabled. (Y012 only) • Check the settings of “Wired LAN Settings” in “Network
Settings” under “Network/USB Settings”.
For details, see the Operating Instructions.
5. Troubleshooting
78