Error
ID
Meaning
Cause
Solution
7
Temp error
• The temperature around
the intake fan is 42
degrees C or higher.
• Temperature sensor is
defective.
• Check the environment, e.g.
whether there is any heat
source near the projector.
• Check if the temperature sensor
connector (CN10) is properly
connected.
• Replace the temperature sensor
board.
• Replace the main board.
8
Installation error
The projector is tilted at angle of
30 degrees or more.
• Check the projector condition.
• Check if the control panel
connector is properly
connected.
9
Memory read
error
A data access error occurred
while accessing the EEPROM
on the main board.
Replace the main board.
10
Audio processor
error
A data access error occurred
while accessing the audio
device.
Replace the main board.
11
Video processor
error
A data access error occurred
while accessing the video
decoder.
Replace the main board.
12
A/D converter
error
A data access error occurred
while accessing the A/D
converter.
Replace the main board.
13
HDMI receiver
error
A data access error occurred
while accessing the HDMI
receiver.
Replace the main board.
Error ID
73
Summary of Contents for Soleil-PJ WX4130
