Ricoh Sirius-SC1fn, Service Manual

Page: 41 / 62

3 December 2004 DIP SWITCH FUNCTION
5-1
Service
Tables
5. SERVICE TABLES
5.1 DIP SWITCH FUNCTION
These switches are on the MCB inside the mainframe. Normally, these are not
used in the field.
SW No. Function Setting Default
1 Boot Mode DFU OFF
2 PCB Production Type DFU OFF
3 Not Used – OFF
4 RTC Backup Battery ON: Uses Battery
OFF: Does Not Use
Battery ON
5.2 SERVICE PROGRAM MODE
5.2.1 SP MODE DESCRIPTION
Entering the service mode
Push the
!
button.
Push the
!
button.
Push the
"
button.
Push the
#
button.
Hold the
$
button down for three seconds.
Class
SP
number
Description Function
001 FTP port Sets the FTP port number.
002
Version Displays the network firmware version.
NOTE: To check the scanner firmware
version with “Web Status Monitor”
or “Web Image Monitor”.
003 Lot No. Displays the machine lot number.
004 Error log Displays the service call number (SC).
005
Initialize SCAN-data Initializes all SP mode data except for the
network data.
006
Initialize all data Initializes all SP mode data (this SP has
the same effect as 1-005 and 1-007
combined).
007 Initialize SCAN-NIC Data Data related to the network is initialized.
008 Density Setup 1 Adjusts Density 1. [0-255/ 40 /1]
009 Density Setup 2 Adjusts Density 2. [0-255/ 70 /1]
010 Density Setup 3 Adjusts Density 3. [0-255/ 100 /1]
011 Density Setup 4 Adjusts Density 4. [0-255/ 130 /1]
1
012 Density Setup 5 Adjusts Density 5. [0-255/ 160 /1]