REPLACEMENT
3 December 2004
3-12
3.2.11 EXPOSURE LAMP
NOTE:
Do not touch the scanner optics unit shaft with your bare hands. This can
cause rust and incorrect movement. If you touch the shaft with your bare
hands, clean the shaft with a cloth and alcohol.
Scanner top cover (
☛
3.2.8)
Move the scanner optics unit to the center of its shaft with the timing belt.
NOTE:
Do not push the scanner optics unit directly when you move it. This
can cause damage to the shaft and scratches on the rail.
[A]: Exposure lamp (
!
x 3,
"
x 1)
Installing the exposure lamp
When you install the exposure lamp, put the mark on the cable at the position [B].
This makes the correct cable buckle for the exposure lamp.
G422R110.WMF
G422R111.WMF
[A]
[B]
