78
Sirius-PJ1Training
Slide 78
Writing Data to New Boards
Data Writing After Replacing the Main Board – 15
Select the type of usage time that you wish to input (lamp, filter, panel, or
projector).
Adjust the time with the scroll bar.
Click ‘Set’.
When “Please Power Off (Standby state).” appears on the computer, make
sure that the projector power is in the standby state, then click OK.
After writing the data, turn the projector power on for at least one minute.
In normal standby mode, the Power indicator is orange and the Status indicator
is green.
In power-saving standby mode, the Power indicator is red and the Status
indicator is off.
If the projector is not in standby mode, press the Power button one time.