57
Sirius-PJ1Training
Slide 57
Optical Axis Adjustment - 5
First, adjust in the vertical
direction with spacers.
Loosen the screw and
insert spacers until the
amount of shadow is as
small as possible.
Maximum amount of
spacers: 5 mm (FL1), 2
mm (RL2)
Then, adjust in the horizontal
direction.
Move the holder left and
right until the amount of
shadow is as small as
possible.
Use the handles at the
ends of each holder
(marked in red).
Then tighten the screw.
FL1
Adjustment
RL2
Adjustment
Adjustment Procedure: Service manual > 3. Replacement and Adjustment >
Replacement of Optical Parts > Optical Parts Adjustment > Adjustment of the
optical axis (Shadow adjustment)
