75
Sirius-PJ1Training
Slide 75
Writing Data to New Boards
Data Writing After Replacing the Main Board – 12
To input flicker data and
usage time data, we use
the service adjustment
software (TBA.exe).
Set up the software as
shown on ‘Data Writing
After Replacing the Main
Board, slide 9’.
Then click ‘Flicker’.
Before you do any more
adjustment, make sure
that the projector power
has been on for 5 minutes,
with the lamp on.
The name of the service adjustment software (TBA.exe) was not decided when
this TTP was made.
