RICOH SC-10 SERIES
Socket Mode Function Operating Instructions Ver.1.0.0
27/66
Work item completed notification response
Message ID
Message name
Description
0x00010007
Work item completed notification
response
Message sent from the SC-10A as a
response to the work item completed
notification.
The value to set in the "Result" field needs to
be changed depending on the sequence to be
executed next.
0: Normal operation (in accordance with the
sequence of SC-10A)
1: Repeat within same work ID (after
execution of the last item within the work ID,
do not send the work ID completed
notification but instead execute the work
items of the same work ID again). Enable this
when you do not want the level of the RUN
signal of the external IO to decrease.
2: Complete work ID forcibly (when stopping
the process at a stage before all items within
the work ID are completed to execute another
work ID in the next operation)
Message format
Address
bit
31
16
15
0
0x0000
Message ID
0x0004
Device ID
0x0008
Device name
0x0048
Result
reserve
Address
Size
Attribute
Field name
Description
0x0000
4 byte
uint32
Message ID
Message unique ID
0x0004
4 byte
uint32
Device ID
Equipment unique ID
0x0008 - 0x0047
64 byte
char
Device name
Up to 50 half-width alphanumeric
characters long
0x0048
2 byte
int16
Result
0: Normal operation
1: Re-execute
2: Complete work ID forcibly
0x004a
2 byte
uint16
reserve
