Ricoh RCP40, Operating Instructions Manual

Page: 16 / 58

Raster Printer Language - Setting Up for Printing
10
1
[ Paper/Quality ] tab
Set the Paper Feed Tray to be used.
❖
❖ ❖
❖
[ Tray Selection ]
Specifies Paper Feed Tray for printing.
Note
❒
Select “Paper Feed Tray” here. Even if you select “Automatically Select”,
the machine uses Paper Feed Tray for printing.
[ Advanced Options ] dialog box
This dialog box is displayed when you click [ Advanced ] on the [ Paper/Quality ] tab
or the [ Layout ] tab. Here you can set detailed items about the paper size and the
functions of the machine.
❖ ❖ ❖ ❖
[ Paper/Output ]
❖ ❖ ❖ ❖
“Paper Size”
Select the size of the paper to be printed.
❖
❖ ❖
❖
“Collated”
If you select more than “2” in “Copy Count”, “Collated” will become ena-
bled. Make sure to regularly clear the “Collated” check box, because if
“Collated” is not cleared, master making may be done everytime a page is
going to be printed.
❖
❖ ❖
❖
[ Document Options ]
❖
❖ ❖
❖
“Advanced Printing Features”
Specifies whether the advanced printing feature is enabled. For normal
printing, leave the advanced printing feature set to the default “Enabled”.
Note
❒
Normally, it is not necessary to change the default.
❖ ❖ ❖ ❖
“Halftoning”
Specifies the type of halftoning to use when printing graphics.
Note
❒
Normally, it is not necessary to change the default.
❖ ❖ ❖ ❖
“Print Optimizations”
Specifies whether the print optimization feature is enabled.
Note
❒
Normally, it is not necessary to change the default.