Ricoh PJ WX5350, Field Service Manual

Page: 72 / 155

[A] : Shadow in vertical direction
[B] : Shadow in vertical direction
Neutral setup position for each adjuster block
• CLG
Vertical :
The holder (CLG) shall be positioned at the height of two spacers (RL2) T1.0.
Horizontal :
Bosses of Cover (OPT) are located in the right and left holder (CLG) holes, each in the center
position.
• RL2
Vertical :
The holder (RL2) is held at the height of only one spacer (RL2) T1.0.
Horizontal :
Bosses of Cover (OPT) are located in the right and left holder (RL2) holes, each in the center
position.
• CLB
Vertical :
The holder (CLB) shall be positioned at the height of two spacers (RL2) T1.0 and one spacer (RL2)
T0.5.
Horizontal :
Bosses of Cover (OPT) are located in the right and left holder (CLB) holes, each in the center
position.
Operation of each adjusting part (see “Adjusting and fixing parts”)
CLG adjustment
3. Replacement and Adjustment
70