Ricoh PJ WX5350, Field Service Manual

Page: 122 / 155

Blinking
light
Red (cycles of 1)
Lamp cover error or
lamp housing error Replace the lamp cover or lamp housing
correctly.
Red (cycles of 2) Temperature error
The projector is overheated. Move the
projector to a cooler location.
Red (cycles of 3) Power error
Power unit is not working properly. Contact
your dealer.
Red (cycles of 4) Fan error Fans will not work correctly.
Red (cycles of 6) Lamp error
Lamp fails to light. Wait a full minute and
then turn on again.
Red (cycles of 9)
[DYNAMIC
CONTRAST] error Dynamic Contrast function is not working
properly. Contact your dealer.
Orange (cycles of
1)
Network conflict
Both the built-in wired LAN and the wireless
LAN cannot be connected to the same
network at the same time.
To use both built-in wired LAN and wireless
LAN at the same time, connect them to
different networks.
Green
Re-firing the lamp (The
projector is cooling
down.)
The projector is re-firing.
Wait for a moment.
Steady
light
Green
Standby ([NORMAL] for
[STANDBY MODE])
Orange
CONTROL PANEL
LOCK is on. You have pressed cabinet button when
Control Panel Lock is on.
CONTROL ID error
Remote control ID and projector ID are not
matched.
Lamp Indicator
Indicator Condition Projector Condition Note
Off Normal
Blinking
light
Red
Lamp has reached its end of life. Lamp
replacement message will be displayed.
Replace the lamp.
5. Troubleshooting
120