Ricoh PJ WX5350, Field Service Manual

Page: 113 / 155

• Some graphics cards have both analog RGB (15-pin D-Sub) and DVI (or DFP) outputs. Use of
the 15-pin D-Sub connector may result in no picture being displayed from the digital output of
the graphics card.
• Do not disconnect the DVI-to-HDMI cable while the projector is running. If the signal cable
has been disconnected and then reconnected, an image may not be correctly displayed.
Should this happen, restart your PC.
• HDMI input signal
• Disconnecting and connecting the HDMI cable may result in no picture being displayed from the
HDMI equipment while the projector is running.
• Should this happen, select the HDMI input again.
• <Two ways to select the HDMI input>
• Press the HDMI button on the remote control.
• Press the Menu button on the projector cabinet, then select [HDMI] from [INPUT].
Functional Test
111