manualshive.com logo in svg

Ricoh P C300W, User Manual

Share
Download
Ricoh P C300W User Manual Download Page 209

Specifications

Energy Saver mode 1

Power Consumption

*1

25.2 W

24.7 W

Default Time

30 seconds

Recovery Time

*1

10 seconds or less

Energy Saver mode 2

Power Consumption

*1

0.66 W

0.64 W

Default Time

1 minute

Recovery Time

*1

12 seconds

Duplex Function

*2

Standard

*1 Recovery time and power consumption may differ depending on the conditions and environment of the

machine.

*2 Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used with) a

duplex tray and the duplex function is enabled as an option.

For details about Energy Saver modes, see page 77 "System Settings".

• If the machine is in Energy Saver mode for 24 hours continuously, the machine automatically

returns to normal state and performs self-maintenance.

•

(mainly Europe)

The power is automatically switched off if the machine is left idle in standby mode for 2 hours.

Information for This Machine

207

Summary of Contents for P C300W





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands