Check to see if there is dirt on the surface of the disc. Be careful not to touch the disc with the fingers when
doing this.
(See Fig. 1)
●
After cleaning the disc with compressed air, place it on the disc tray and mount it.
(See Fig. 2)
●
We suggest using dry air cleaner as compressed air for cleaning.
●
Other Cautions
When moving the equipment, make sure that the disc has been removed from the drive.
●
When connecting connectors, make sure that the power is OFF. If the power is ON, there is a possibility of
short circuit.
●
When not using the drive for a long period, dust may adhere to the disc tray. Before using the drive again, use
dry air cleaner to remove the dust from the tray.
●
Summary of Contents for MP7163A
