Ricoh MP7163A, User Manual

Page: 9 / 43

Explains the system environment required for using the drive as a CD-R/CD-RW drive.
PC
IBM PC/AT compatible
Operating System Windows ME/98/95(ORS2 or later)
Windows NT Workstation Ver.4.0 (Service Pack 5) or later
*1
Windows 2000 (Professional)
*1
CPU Pentium 166 MHz or higher (when using Just Link)
Memory 64MB or more
Harddisk Hard disk with average access time of 19msec or less, and data transfer speed of 1,200KB/sec
or greater. 1GB or more free space.
Interface Enhanced-IDE interface (as Primary Slave, Secondary Master, or Slave)
Drive bay 5.25-inch half height bay required
Power +5V/+12V power socket required
Recommended discs
*3 CD-R: Ricoh, Mitsubishi Chemical, Taiyo Yuden, Mitsui Chemicals, TDK
and Maxell discs
CD-RW:
Ricoh and Mitsubishi Chemical discs
*2
High Speed CD-RW:
Ricoh and Mitsubishi Chemical discs
*1 At present InCD does not support these Operating Systems.
*2 The disc written using the CD-R/RW drive may not be readable by CD-ROM drives. Multi-read
compatible (Random UDF compatible) drives are necessary.
*3 Some discs may fail at the highest writing speed due to a disc problem. In this case, please try to
write at lower writing speeds, or please use another disc.
Multi-read compatible (Random UDF compatible) drives are:
Drives that can read low reflectivity discs.
●
Drives that support Packet Writing.
●