Load the disc
Press the eject button.
1.
Place the disc on the disc tray.
2.
Caution
When using a 120mm CD, place it in the large round depression.
❍
When using an 80mm CD, place it in the small round depression with
its label side facing up. (Writing to an 80mm CD is not supported.
Only reading is possible.)
❍
The face with the label on it should be up. Never place both discs in
the tray at the same time.
❍
Be careful not to touch the recording surface of the disc.
❍
Writing/reading to a business card CD is not supported.
❍
Summary of Contents for MP7163A
