Staple paper size:
A3 SEF, A4 LEF/SEF, B4 JIS SEF, B5 JIS LEF/SEF, 11 x 17 SEF,
8 1/2 x 14 SEF, 8 1/2 x 13 SEF, 8 1/2 x 11 LEF/SEF, 8 1/4
x 14 SEF, 8 1/4 x 13 SEF, 7 1/4 x 10 1/2 LEF/SEF, 8K SEF,
16K LEF/SEF
Staple paper weight:
64–80 g/m
2
(17–20 lb. Bond)
Staple capacity (80 g/m
2
, 20 lb.
Bond):
5 sheets:
A3 SEF, A4 LEF/SEF, B4 JIS LEF/SEF, B5JIS LEF/SEF, 11x17
SEF, 8 1/2x14 SEF, 8 1/2x13 SEF 81/2x11 LEF/SEF, 8
4/1x14SEF, 8 1/4x13 SEF, 7 1/4x10 1/2 LEF/ SEF, 8K SEF,
16K LEF SEF
Stack capacity after stapling (80
g/m
2
, 20 lb. Bond):
• 30 sets or more (A4 LEF, 81/2 × 11 LEF)
• 20 sets or more (B5 JIS LEF/SEF)
• 15 sets or more (A3 SEF- A4 SEF, B4 JIS SEF, 11 × 17
SEF, 8 1/2 × 11 SEF)
Staple position:
Bottom Slant
Power consumption:
30 W or less
Dimensions (W x D x H):
435 x 515 x 150 mm (17.2 x 20.3 x 6.0 inches)
Weight:
Approx. 10 kg (22.1 lb.)
Side Tray Type M3 (D725)
Paper size:
A3 SEF, A4 LEF/SEF, A5 LEF/SEF, A6 SEF, B4 JIS SEF, B5 JIS
LEF/SEF, B6 JIS SEF, 11 x 17 SEF, 8 1/2 x 14 SEF, 8 1/2 x
13 SEF, 8 1/2 x 11 LEF/SEF, 8 1/4 x 14 SEF, 8 1/4 x 13
SEF, 8 x 13 SEF, 8 x 10 SEF, 7 1/4 x 10 1/2 LEF/SEF, 5 1/2
x 8 1/2 SEF, 4 1/8 x 9 1/2 LEF/SEF, 3 7/8 x 7 1/2 LEF/
SEF, C5 Env LEF/SEF, C6 Env LEF/SEF, DL Env LEF/SEF, 8K
SEF, 16K LEF/SEF, 12 x 18 SEF, 11 x 15 SEF, 10 x 14 SEF,
SRA3 SEF, SRA4 LEF/SEF, custom size
Paper weight:
52–300 g/m
2
(14 lb. Bond–110 lb. Cover)
1. Appendices:Specifications
30
Summary of Contents for MET-C1
