Ricoh M178-21 Field Service Manual Download Page 82

Page: 82 / 252

Click the User Tool tab (1), open the List/Test pull-down list (2), and then click [Print]. The
Test Page prints.

Check the margins of the image area to see the width of the margins are satisfactory.

Margin

Width (mm)

[A]

Left

4.2

[B]

Right

4.2

[C]

Leading

4.2

[D]

Trailing

4.2

Enter the service mode and display the Service Mode screen.

Adjust the Factory Registration settings to adjust the margins.

• Horizontal. Shifts the image left or right to adjust the left/margins.
• Vertical. Shifts the image up or down to adjust the top/bottom margins.

4. Replacement and Adjustments

Summary of Contents for M178-21





























































































































































































































































Search results

Summary of Contents for M178-21

Reviews:

Related manuals for M178-21

Brands by name

Popular brands

Ricoh M178-21, Field Service Manual

Search results

Summary of Contents for M178-21

Reviews:

Related manuals for M178-21

Brands by name

Popular brands