Ricoh M095 Page 161 Service Manual Download

Page: 161 / 240

Service Menu

SM 5-21

M095/M096/M099/M100

Syste

Ref

eren

5.4 SERVICE

MENU

5.4.1 OVERVIEW

These models have several service menus. Each service menu has several adjustment items.

This section explains how to enter each service menu and what you can do in each service

menu.

Each menu is classified into two "Modes" depending on how you enter the service menus.

"Menu Mode" can be executed by pushing a sequence of keys.

"Special Mode" can be executed if you press certain keys at the same time as you turn the

power on.

This service manual is a combined manual for the MF Model and the Printer Model.

Therefore, the order of some service menus is different from the actual one in the

Printer model.

Each menu is classified as follows:

Menu Mode

Maintenance Mode Menu

This is a menu for maintenance and service.

Special Mode

Factory Default Settings Menu

This is a menu for initializing all information stored

in the controller, except for some counters.

These counters are initialized:

Print/Scan/Copy/Fax functional Counter, Jam

Counter

These counters are not initialized:

Printer/Scanner Engine Counter, which are

printed in the "Configuration Page".

After initializing with this menu, when the user

powers on the machine, the Initial Setup Menu

appears. The user must select Language in

Country in this menu.

Fax Service Test Menu (only for MF

models)

This is a menu for checking the fax mode.

Summary of Contents for M095

















































































































































































































































Search results

Summary of Contents for M095

Reviews:

Related manuals for M095

Brands by name

Popular brands

Ricoh M095, Service Manual

Search results

Summary of Contents for M095

Reviews:

Related manuals for M095

Brands by name

Popular brands