manualshive.com logo in svg

Ricoh M095, Service Manual

Share
Download
Ricoh M095 Service Manual Download Page 180

Firmware Updating 

M095/M096/M099/M100 5-40 

SM 

5.6 FIRMWARE 

UPDATING 

 

ƒ

 

Do not turn off the main power of the machine during the firmware updating. If doing so, 

the engine board or controller board may be damaged. 

5.6.1  CHECKING THE MACHINE FIRMWARE VERSION 

1.  Turn the machine on. 

2.  If the printer driver is not installed on your PC, install the printer driver now. 

3.  Press "Menu" and select "Report Print" with the "Up" or "Down" key. 

4.  Press "OK" and select "Maintenance Page" with the "Up" or "Down" key. 

5.  Press "OK" to display the "Firmware version (Controller)" and "Engine FW version" 

5.6.2 UPDATING THE CONTROLLER FIRMWARE 

1.  Make a folder in your computer. 

2.  Save the files (".dwn", "/ini" and ".exe") in the folder. 

3.  Click the exe file to execute the updating program. 

 

4.  Click "Burn" to send the controller firmware from the PC to the machine. 

Summary of Contents for M095

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands