Setting Originals
52
4
Changing the Color of the Background
Panel
Change the color of the Background Panel to enable auto original size detection
or scan in clear images.
Important
❒
Change the settings of the TWAIN driver from
[
Back.Panel
]
tab in
[
Initial Set-
tings
]
of the driver dialog.
❒
Make sure that the color of the Background Panel for Exposure Glass, ADF
and settings made in
[
Back.Panel
]
tab on the TWAIN driver are same.
Note
❒
The size of the originals that can be automatically detected will be different
depending on the color of the Background Panel.
⇒
p.46 “Original Sizes
Available for Auto Detection”
❒
You can reduce the transparencies of the duplex printed originals by setting
the Background Panel to Black.
❒
To scan the transparent originals which is simplex printed, set the Back-
ground Panel to White.
Changing the Color of the Background Panel for the ADF
Preparation
Skip this procedure if you use the simplex scanner.
AAAA
Lift the Pressure Panel.
BBBB
Take off the Background Plate for Exposure Glass.
Reference
⇒
p.54 “Changing the Color of the Background Panel for the Exposure
Glass”
ADC035S
Summary of Contents for IS760
