USING THE SCANNER
2-5
USING THE DOCUMENT FEEDER MODE
The Document Feeder Mode lets you automatically feed single-sheet originals
from the document feeder for high-speed scanning.
The following defines the type of original that can be scanned using the
Document Feeder Mode. Any original that does not meet the following
specifications must be scanned using the Book Mode.
Size
Length: 128 to 1260 mm (5.04” to 49.61”)
Width: 105 to 297 mm(4.13” to 11.69”)
Weight
52.3 to 104.7 g/m
2
(14 lb to 28 lb)
Stacking
74.8 g/m
2
(20 lb) paper x 30, 104.7 g/m
2
(28 lb) paper x 20
Curl
Front curl: Less than 5 mm (0.2”)
more than 30R
If the originall is curled, flatten it to within the above limitations.
Note: Using the Document Feeder Mode with certain types of originals can
cause misfeeding and damage to the original. Be sure to use the Book
Mode whenever scanning the following types of originals.
❐
Originals whose measurements are outside the size ranges specified above.
❐
Originals with staples or paper clips attached to them.
❐
Originals with holes (more than
∅
12 mm)or tears.
❐
Originals that are torn, folded, or wrinkled.
❐
Originals consisting of pieces pasted together.
❐
Originals printed on thermal paper, art paper, photographic paper, carbon paper,
electrolytic paper, or any other treated paper.
❐
Originals with appendages such as index tabs, stickers, etc.
❐
Originals printed on tracing paper or other types of paper that do not slide easily.
❐
Originals printed on post cards or paper whose thickness is not proper.
❐
Books or other bound pages.
❐
Originals printed on OHP film, tracing paper, or other highly transparent paper.
