Ricoh IS 2255, General Settings Manual, Page: 130 / 270

Copier/Document Server Features
122
3
Input/Output
This section describes various items of [ Input / Output ] under [ Copier / Document
Server Features ] .
Default settings are shown in bold type .
❖
Switch to Batch
You can select to have Batch mode or SADF mode displayed when you press
the
[ Special Original ] key.
• Batch
• SADF
❖
SADF Auto Reset
In SADF mode, an original must be set within a specified time after the pre-
vious original has been fed.
You can adjust this time from 3 to 99 seconds in increments of 1 second.
The timing is set to "
5 second(s) " by default.
❖
Rotate Sort: Auto Paper Continue
You can specify to continue copying when paper of the required orientation
has run out during rotatesorting.
• On
Copying continues using copy paper of a different orientation. The copy
job will finish even if you have left the machine.
• Off
When paper of the required orientation runs out, the machine stops copy-
ing and prompts you to supply copy paper. After you have loaded paper,
the machine will continue copying.
❖
Copy Eject Face Method in Glass Mode
You can specify the way in which copies are delivered when copying an orig-
inal placed on the exposure glass.
•
Face Up
• Face Down
❖
Copy Eject Face Method in Bypass Mode
You can specify the way in which copies are delivered when copying in By-
pass mode.
•
Face Up
• Face Down