Ricoh IS 2255, General Settings Manual, Page: 115 / 270

Edit
107
3
❖
Back Margin: Top / Bottom
You can specify top and bottom margins on the back side of copies in Margin
Adjustment mode.
•
Top
• Bttm.
Default:
• Metric version:
Top / Bottom 0mm
• Inch version: Top / Bottom 0.0"
❖
1 Sided
→
2 Sided Auto Margin: TtoT
In 1 sided to 2 sided Duplex mode, you can specify the margins on the back side.
The margin is set to the same value of “Back Margin: Left / Right".
• Left
•
Right
Default:
• Metric version:
Right 5 mm
• Inch version: Right 0.2"
❖
1 Sided
→
2 Sided Auto Margin: TtoB
In 1 sided to 2 sided Duplex mode, you can specify the margins on the back side.
The value set for "Back Margin: Top / Bottom" is used.
•
Top
• Bttm.
Default:
• Metric version:
Top / Bottom 0mm
• Inch version: Top / Bottom 0.0"
❖
Erase Border Width
You can specify the width of the erased border margins with this function.
Default:
• Metric version:
10mm
• Inch version: 0.4"
❖
Erase Original Shadow in Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1" boundary
margin around all four edges of each original.
•
On
• Off
❖
Erase Centre Width
You can specify the width of the erased centre margins with this function.
Default:
• Metric version:
10 mm
• Inch version: 0.4"